Tuesday, September 4, 2012

TEN REASONS TO CHOOSE AN OWON SDS7102V 100MHz OSCILLOSCOPE




       

1.         High Resolution Display (800 x 600); 8" diagonal, full color, with brightness and grid option controls

2.         Clean, high-fidelity front-end circuit design: well-behaved response across the band (typically < -1.5dB out to 90MHz; typically < -1.6dB @ 100MHz; -3dB typically @ ~150MHz)

3.         Accurate and stable time base: observed jitter typically < 300ps; channel skew <200ps span="span">

4.         10M point per channel memory

5.         Highly accurate and repeatable automatic measurements (twenty types)

6.         Dual, independent channel controls: sensitivity, position and trigger ("Alternate" trigger allows for different settings per channel)

7.         Easy feature access via twenty-four control keys

8.         AUTOSCALE function - 'on-the-fly' display re-scaling speeds signal tracing efforts

9.         Pre-configured for battery operation: > 4 hours of operation typical; easily user-installed; makes field use practical (battery assembly is optional at extra cost)

10.        VGA and LAN ports included (at no extra cost). 

No comments: