Saelig Announces Micsig SigOFIT Gen 3 Series 1GHz Optically Isolated Probes which offer a galvanically-isolated measurement solution for accurately resolving high bandwidth, high voltage differential signals in the presence of large common mode voltages. https://www.saelig.com/pr/sigofit-gen3.html
USB 2.0 Galvanic Isolator helps:
* Protecting computers and attached USB devices
Latest SAELIG Newsletter discusses sensing in intrinsically safe areas ...
https://www.saelig.com/news/newsletters/saelig-071426-newsletter.pdf
SigOFIT Optical-fiber Isolated Probes: Saelig Online Store
With Micsigs exclusive SigOFIT optical isolation technology, the SigOFIT series probe can be powered by laser, delivers extremely high CMRR and isolation voltage, help engineers to see the whole truth of the signal within its bandwidth.
Present True Signal
SigOFIT series probe has highest common mode rejection ratio, or CMRR, up to 112dB at 100MHz, over 100dB at 500MHz. It is the ultimate referee of signal fidelity measured by other voltage probes.
Highest Accuracy
The SigOFIT probe has excellent amplitude-frequency characteristics, effective accuracy bandwidth [1] is as high as more than 50% of the nominal bandwidth. Within the effective accuracy bandwidth, the test accuracy of 1.5% can be guaranteed, and the DC gain accuracy is better than 1%. The maximum noise floor within the range is 1.41mVrms, and zero drift is less than 500u V after warm-up.
Latest SERVO Newsletter is out! For years, robot combat in the United States was a niche sport reserved for relatively small groups of builders. In the course of less than two years, however, the BattleBots™ competition grew from another middle sized competition to a nationally broadcast show on Comedy Central. Television audiences had never seen anything like it; BattleBots was a complete novelty — and Americans could not get enough!
... should be a USB scope! https://www.saelig.com/news/articles/next-scope-should-be-usb-oscilloscope.pdf
The SGA-60 USB Vector Signal Generator from 9 kHz to 6 GHz from HAROGIC Technologies is an economical USB Vector Signal Generator designed to deliver laboratory-grade RF performance in a compact, cost-effective form factor for footprint-sensitive, budget-conscious test environments. This signal generator is based on a 16-bit DAC for high-quality baseband waveform synthesis and integrates an FPGA-based interpolator for fine-grained sampling-rate adjustment. $3167!!
https://www.saelig.com/pr/sga-60.htm
Wideband RF signals, deep arbitrary signals, and high-speed wave functions all in one instrument. The SDG8000A Series Arbitrary Waveform Generator combines 3 versatile generator modes and 4 output settings for dynamic, high frequency signals including:
The SDG8000A
also includes 4 operating modes: DC high bandwidth for excellent signal
quality, AC direct which includes a balun in the output stage with
improved RF performance, and two modes that add an amplifier to the DC and AC
modes. These increase output amplitude with software options SDG8000-DCAMP and
SDG8000-ACAMP. saelig.com/category/sdg8000a.htm
Posts
All Comments
