Measuring ultra-low currents?

2nA - 20mA with1fA / 6 ½ digit resolution? Yes we have that!

The AMETRIX Model 10x SeriesPicoammeters, with several models that include a built-in voltage bias source. These instruments are USB-connected, very-low-current measurement devices, designed for DC currents from 20pA to 1mA. They are ideal for measuring very low electrical currents in optoelectronics, ion and electron beam monitoring, materials resistance testing, and more. The Model 10x Series are cost-effective picoammeters that combine fast and accurate measurements with ranges, resolution, and accuracy that exceed those in more expensive instruments; providing quiet, stable measurements and fast response times.  The Model 100 is for applications that do not need a bias source; the Model 101 includes a 0 to ±10V low-voltage bias supply.  

The AMETRIX Picoameters are ideal for applications such as: electron and ion beam current measurements, electron current stability testing, ion current stability testing, mass spectrometer current measurements, photodiode current, dark current measurements (up to 127 devices simultaneously), beam and particle monitoring, data-logging current comparisons, conductivity measurements, optical fiber alignment, component, sensor, and device i-v characterization, leakage current testing, vacuum diode testing, analog and mixed-signal circuit testing and analysis, teaching labs, and more.

  http://bit.ly/1l6GJf8 

PIEcal Model 525B Automated RTD & Thermocouple Calibrator

The PIEcal Model 525B Automated RTD & Thermocouple Calibrator is a precision temperature sensor calibrator/simulator that handles RTDs & thermocouples with its built-in NIST-traceable cold junction sensor.  Here's a video that describes the salient features of this invaluable industrial handheld calibrator/simulator that is essential for any industrial engineer's toolkit to keep processes in spec!

https://youtu.be/SNsbuDxbFAU

We don't use THIS language here !!!

At Saelig Company Inc. (http://www.saelig.com ) we don't use THIS language in promoting our unique test equipment!

Detailed description video showing how to use RevEng Reverse-engineering Equipment

This video takes you step-by-step through creating a circuit diagram from an unknown PCB - one that lacks any schematics for troubleshooting.  Watch this 3min video showing how to use the RevEng Reverse Engineering equipment to re-create schematics from PCBs without documentation: https://youtu.be/AhTEneQ7Aa0

You can even use it to recreate the PCB layout and get back in business with obsolete boards!

RevEng Helps You Fix Obsolete PCBs That Have No Schematics!

Fixing PCBs but no schematics?

Sometimes you have to troubleshoot PCBs - often obsolete - that have no documentation.  Here's an ideal solution for these situations: recreate the schematics with ABI Electronics' RevEng reverse engineering equipment.  Semi-automated, it can check components connections and produce authentic circuit diagrams for quite complex boards.  From this netlist you can also recreate the board layout to remove the obsolescence issue too!

 You need to get RevEng! https://www.youtube.com/watch?v=xlV-9UuOaZI

New Picoscope Software

Release 6.11.7 PicoScope® software used on all of Pico Technology's PC-based oscilloscopes now adds “pinch&zoom” support for touchscreens, new math waveform processing tools, 16 serial protocol decoders, and improvements to FFT frequency domain plotting. Advanced waveform mathematics now includes user-configurable filters: High Pass, Low Pass, Band Pass and Band Stop.  

Precompliance testing

It is becoming increasingly important to do some basic EMI testing before a products goes for formal testing.

If you're doing precompliance EMC/EMI testing you need our Sniffers!  Complete with 20/40dB amplifiers so you can use any Spectrum Analyzer, such as Rigol's ubiquitous DSA815

http://www.saelig.com/product/M00154003.htm